Resolution: from 512x256 up to 1280x1024 and respectively HSYNC from 15kHz ... 85kHz.
Output Signals: VGA or DVI auto sensing; optional the RGB(S) Input Signal through additional Adaptor.
Scaling: -Original in Black Box 1:1 -Format Fitting -Proportional Fitting -Fixed Stretch Factor 2:1
	Option: Video to DVI/VGA-conversion using an additional adaptor. Option: EGA to DVI/VGA- conversion using an additional adaptor cable. Supporting the traditional VGA Standard, and new DVI Standard
Desktop Devices - Rack Mount options (19"): Mount up to 3 devices in 19"/1U or up to 6 devices in 19"/2U. This saves expensive rack space.
	Using an additional Adaptor, it is possible, to use the RGB(S) Input Signal additionally (e.g. for Video Printer) Using optional Adaptors, you can also display EGA- Signals on a VGA or DVI Monitor.
Parts Delivered: RGB to DVI Converter, international p.s.u., RGB(S) to DVI-I Adaptor, DVI-I to VGA Adaptor.

The performance of a CRT monitor is determined by two main parameters: the signal type - VGA, RGB, FBAS, SVHS, ... and the synchronization frequencies - HSYNC and VSYNC.

To display an RGB signal, standard VGA-screens need Red, Green and Blue as analogue signals with 0.7Vpp and synchronization signals as TTL-signals in a range for HSYNC of 30kHz up to more than 100kHz and for VSYNC of 50Hz up to more than 120Hz.

The use of TFT-Monitors with RGB signals can be difficult: these monitors must digitize the incoming video signals and display the result. To do this, the monitor needs to be given the exact count of pixels per line and the phase of the pixels. Note: many flat screens only operate with the so-called VESA resolutions. Screens may not necessarily recognize the resolution at the output of the RGB to VGA converter. Please contact your screen manufacturer, to determine whether the display is able to show the generated resolution/sync-frequency.

The RGB to DVI/VGA Converter displays the signals of a RGB source in a format that can be shown on a traditional CRT with VGA connector as well as on a flat screen with DVI connector. NEW: now supporting (using an additional adaptor cable) EGA!

The device digitizes the incoming video signals and stores them in an internal video memory. From there they are displayed in a compatible, user selectable, format: 640x480, 800x600, 1024x768 or 1280x1024, with 75Hz or 60Hz refresh rate. Before displaying, the picture can be stretched to fit to the screen size: 1:1 in a black box; fully fitting to the screen size; fitting one dimension with the other scaled appropriately; or at a fixed 2:1 stretch factor.

Power Requirements
Voltage	PSU: 90..240VAC-0.5A-47..63Hz/6VDC-2000 mA
Power required	RGB to DVI(/VGA) Converter: approx. 8W
Interface (Depending on type of device)
Monitor	VGA (res.: 1280x1024@75Hz, plug&play supported) DVI (res.: 1280x1024@60Hz, plug&play supported)
Colour Depth	15 Bit for converting to DVI/VGA (5 Bit per colour)
Bandwidth	165 MHz
RGB/RGBS	0,7Vpp for color signals without Sync, 1Vpp for GREEN (with Sync), 0,7Vpp for composite Sync
CGA/EGA	TTL for colours and Sync
FBAS / Composite	1Vpp composite video signal
Y/C	0,7Vpp for luminance signal and chrominance
Size and Shipping Weight
RGB to DVI(/VGA) Converter	6.7?x5.2?x1.7? (170x133x44mm) Weight: 2.2lb (1.0kg) each
Shipping box	Shipping Box: 18.1?x9.8?x4.7? (460x250x120mm) Weight: 9.5lb (4.3kg)
Environmental
Operating Temperature	41 to 113?F (5 to 45 ?C)
Storage Temperature	-13 to 140?F (-25 to 60 ?C)
Relative Humidity	max. 80% non-condensing

This is an example of what a setup would look like.

For more detailed information on specific models, Please Contact our sales representative at:

Toll Free: 1-800-487-2243

Model#	Description
RGB2VGA	Digital RGB to DVI/VGA Converter (70 RGB formats Preinstalled)

	Downloadable version of our product manual.
	Downloadable version of our product brochure.
	Download the 2008 SmartAVI catalog.